Bahan Komposit Sihir Dongguan CO., LTD.
Mobile: +86-18924550481
E-mail: [email protected]
Tambah: NO.2,4F,1st.Gawe Bangunan,NO.7, Dalan Tengah Santang,Kutha Gaobu,Kutha Dongguan,Provinsi Guangdong,Cina
Features:
1. High transparency
2. Resistance to yellowing
3. Food grade
4. Can be customized
Application:
120-2AB specially designed for 3D floors, photos, photo frames, badges, stickers, panels, stickers, signs etc..M120-2AB Feature:↴
Epoxy resin adhesive 120-2AB is transparent type, can be cured at room temperature or warming. After curing, the surface is flat, the gloss is good, no bubbles, and there are many different specifications according to the thickness of the glue, anti-yellowing performance, curing time, ratio, etc..Properties before Hardening ↴
Epoxy120-2A Hardener120-2B | |||
Appearance | 120-2A | 120-2B | |
Color | Transparent | Transparent | |
Specific gravity 25℃g/cm3 |
1.12±0.1 | 0.9±0.1 | |
Viscosity25℃ | 8000±500 mpa.s | 160-±30 mpa.s | |
Usable Method | Mixing Ratio | A:B=3:1(Weigh Ratio) | |
Usable time | 25℃×30-40minutes | ||
Hardening conditions | 25℃×8-12 hours or 60℃×3hours |
Instructions: |
. |
1. Clean the ground and remove dust 2. Spread a layer of primer 3. After the primer is dry, lay the 3d drawings 2. Pour A and B into the rubber mixing container according to the weight ratio and stir evenly, and then spread on the drawing 4. You can use a fire gun to speed up the drying and the work is completed. |