top
Modern Design Transparent Epoxy 3D Floor Paint Coating
See more pictures
Description:

Feature:
1. High transparency
2. Resistance to yellowing
3.Waterproof, oil-proof
4. High hardness

- +
0
- +
0
- +
0

Product Detail
Feedback Now

120-2AB specially designed for 3D floors, photos, photo frames, badges, stickers, panels, stickers, signs etc..M120-2AB Feature:
Epoxy resin adhesive 120-2AB is transparent type, can be cured at room temperature or warming. After curing, the surface is flat, the gloss is good, no bubbles, and there are many different specifications according to the thickness of the glue, anti-yellowing performance, curing time, ratio, etc..
Properties before Hardening ↴

Epoxy120-2A Hardener120-2B
Appearance 120-2A 120-2B
Color Transparent Transparent
Specific gravity
25℃g/cm3
1.12±0.1 0.9±0.1
Viscosity25℃ 8000±500 mpa.s 160-±30 mpa.s
Usable Method Mixing Ratio A:B=3:1(Weigh Ratio)
Usable time 25℃×30-40minutes
Hardening conditions 25℃×8-12 hours or 60℃×3hours
Production Process:
.
1. Polish the ground and clean up the dust

2. Apply primer

3. Stick the 3D canvas on the ground without creases

4. Mix epoxy resin and hardener according to the proportion, and then spread on the surface of the art canvas, paying attention to the uniform coating

Use Attention Issues:
.
1. Please read the label on the package clearly before dispensing glue, and confirm the proportion of A and B agent.

2. The glue dispensing tools should be clean and dry, free of dust, water and oil.

3. Mix the A and B components according to the proportions and mix them evenly, so as to avoid unevenness leading to non-curing or insufficient hardness.

4. Since the glue starts to react and heat up after mixing, the more the amount of glue, the greater the heat. At the same time, the curing time will be shortened and the usable time will be shorter. Therefore, please make an appropriate amount of glue according to the glue filling time. So as not to cause waste.

5. After dispensing the glue, seal the AB agent package to prevent debris or moisture absorption and ensure normal use next time.

6. There are a very small number of people who have mild skin allergies when they contact the glue for a long time. It is recommended to wear protective gloves when using them. If they stick to the skin, they can be wiped off with alcohol and cleaned with detergent.

7. Before mass use, please try a small amount first to master the use skills of the product to avoid errors.

Send your message to us:
×
taiyingfuhecailiaojiaoshuitu
3d-epoxy-floor-paint
3d-epoxy-paint
3d-floor-epoxy-painting
3d-floor-paint
3d-house-floor
epoxy-3d-painting
Chat with Vincent Porter
already 1902 messages

  • Porter 10:12 AM, Today
    Dear sir/madam, Welcome to our website! What should I do for you?