Clear Wood Casting Epoxy For River Tables
See more pictures
Description:

1. 3:1weight ratio, High Gloss, anti-yellowing

2. High hardness,88-90shoreD

3. Free Solvent,No VOC

4. Clear Transparent 100%

5. Deep pouring once

6. Anti high teamperature after curing

- +
0
- +
0
- +
0

Product Detail
Feedback Now

We have two kinds for different thickness.
136-2AB can be filled with 2-2.5cm thickness for one layer once under 25-28degree room temperature.It can be filled 4.5-5cm thickness one layer once under 18-20degree at air conditioner room.

136-3AB can be filled with 4.5-5cm thickness for one layer once under 28-32degree room temperature.It can be filled 7-10cm thickness for one layer once under 18-20degree at air conditioner room.
Properties before Hardening ↴

Epoxy136-2A Hardener136-2B
Appearance 136-2A 136-2B
Color Transparent Transparent
Specific gravity
25℃g/cm3
1.12±0.1 0.8±0.1
Viscosity25℃ 3000±500 mpa.s 150±30 mpa.s
Usable Method Mixing Ratio A:B=3:1(Weigh Ratio)
Usable time 25℃×30-45minutes
Hardening conditions 25℃×10-12 hours

Properties before Hardening ↴

Epoxy136-3A Hardener136-3B
Appearance 136-3A 136-3B
Color Transparent Transparent
Specific gravity
25℃g/cm3
1.12±0.1 0.9±0.1
Viscosity25℃ 3000±500 mpa.s 150±30 mpa.s
Usable Method Mixing Ratio A:B=3:1(Weigh Ratio)
Usable time 25℃×45-60minutes
Hardening conditions 25℃×10-12 hours

Operation
.
1. Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2. Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3. When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.

Creating the right working conditions
Working Attention:
.
Work Condition:Under 28-34Degree Room Temperature,No air condition,No Fan Room,It can make 3-3.5cm thickness pouring.
.
Under 28-32Degree,air Fan room,it can make 4-5 cm thickness pouring,fan need to blow to epoxy tables when epoxy not cure.
Under 28-34degree,air -condition and air fan room,blow to epoxy tables,it can make 5cm thickness pouring.
.
Above condition,mild react,but in final react,it will a bit faster,but it will not broken as our working attention!And 4cm thickness pouring,it will 12 hours curing time.
.
Misunderstood:Not slow curing time,epoxy will pour more thicker,some epoxy will 24 curing time,but it will fast react in one time intensively then it will broke,so not as the curing time,it will as the epoxy performance!
If you tested our eopxy still have a bit detail problems,we will go to vietnam to guide you with our engineer!

Send your message to us:
×
clear-wood-casting-epoxy-for-river-tables
taiyingfuhecailiaojiaoshuitu
ab-resin
artresin-ab
epoxy-wood-tables
avatar
Chat with Vincent Porter
already 1 902 messages

  • Porter 06:15.AM  Jun.25,2021
    Dear sir/madam, Welcome to our website! What should I do for you?