Dongguan Magic Composite Materials CO.,LTD.
Mobile: +86-18924550481
E-mail: [email protected]
Add: NO.2,4F,1st.Building,NO.7,Santang Middle Road,Gaobu Town,Dongguan City,Guangdong Province,China
120-2AB specially designed for 3D floors, photos, photo frames, badges, stickers, panels, stickers, signs etc..M120-2AB Feature↴
Epoxy resin adhesive 120-2AB is transparent type, can be cured at room temperature or warming. After curing, the surface is flat, the gloss is good, no bubbles, and there are many different specifications according to the thickness of the glue, anti-yellowing performance, curing time, ratio, etc..Properties before Hardening ↴
Epoxy120-2A Hardener120-2B | |||
Appearance | 120-2A | 120-2B | |
Color | Transparent | Transparent | |
Specific gravity 25℃g/cm3 | 1.12±0.1 | 0.9±0.1 | |
Viscosity25℃ | 8000±500 mpa.s | 160-±30 mpa.s | |
Usable Method | Mixing Ratio | A:B=3:1(Weigh Ratio) | |
Usable time | 25℃×30-40minutes | ||
Hardening conditions | 25℃×8-12 hours or 60℃×3hours |
Operation |
. |
1. Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2. Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption. 3. When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing. |
Product advantages ↴