Dongguan Magic saamgestelde materiale CO, LTD.
Mobiel: +86-18924550481
E-pos: [email protected]
Voeg by: NO.2,4F,1st.Gebou,NO.7, Santang Middle Road,Gaobu Town,Dongguan-stad,Guangdong Provinsie,Sjina
120-2AB spesiaal ontwerp vir 3D vloere, foto's, foto rame, kentekens, plakkers, panele, plakkers, tekens ens..M120-2AB-funksie:↴
Epoxyhars kleefmiddel 120-2AB is deursigtig, kan by kamertemperatuur of verhitting genees word. Na genesing, die oppervlak is plat, die glans is goed, geen borrels nie, en daar is baie verskillende spesifikasies volgens die dikte van die gom, anti-vergeling prestasie, genesingstyd, verhouding, ens..Eienskappe voor verharding ↴
Epoxy120-2A Verharder120-2B | |||
Voorkoms | 120-2A | 120-2B | |
Kleur | Deursigtig | Deursigtig | |
Spesifieke swaartekrag 25℃g/cm3 |
1.12± 0,1 | 0.9± 0,1 | |
Viskositeit25 ℃ | 8000± 500 mpa.s | 160-± 30 mpa.s | |
Gebruikbare metode | Mengverhouding | A:B = 3:1(Weegverhouding) | |
Bruikbare tyd | 25℃ × 30-40 minute | ||
Verhardingstoestande | 25℃ × 8-12 uur of 60 ℃ × 3 uur |
Production Process: |
. |
1. Polish the ground and clean up the dust
2. Apply primer 3. Stick the 3D canvas on the ground without creases 4. Mix epoxy resin and hardener according to the proportion, and then spread on the surface of the art canvas, paying attention to the uniform coating |
Use Attention Issues: |
. |
1. Please read the label on the package clearly before dispensing glue, and confirm the proportion of A and B agent.
2. The glue dispensing tools should be clean and dry, free of dust, water and oil. 3. Mix the A and B components according to the proportions and mix them evenly, so as to avoid unevenness leading to non-curing or insufficient hardness. 4. Since the glue starts to react and heat up after mixing, the more the amount of glue, the greater the heat. At the same time, the curing time will be shortened and the usable time will be shorter. Therefore, please make an appropriate amount of glue according to the glue filling time. So as not to cause waste. 5. After dispensing the glue, seal the AB agent package to prevent debris or moisture absorption and ensure normal use next time. 6. There are a very small number of people who have mild skin allergies when they contact the glue for a long time. It is recommended to wear protective gloves when using them. If they stick to the skin, they can be wiped off with alcohol and cleaned with detergent. 7. Before mass use, please try a small amount first to master the use skills of the product to avoid errors. |